Thank you for choosing the PitPet Automatic Pet Feeder! With this feeder, you can ensure your pet receives their meals right on schedule, even when you’re not around. This guide will walk you through the setup, operation, and maintenance of your new automatic pet feeder, helping you get the most out of your purchase.
PitPet Automatic Pet Feeder User Guide PDF
PitPet Automatic Pet Feeder User Guide: Step-by-Step Instructions
1. Safety Precautions
- Carefully read all instructions before using the feeder.
- Keep the feeder out of children’s reach.
- Do not submerge the feeder in water or any other liquid.
- Use only the provided power adapter.
- Do not use the feeder if the power cord is damaged.
- Unplug the feeder before cleaning.
2. Components
- Main Feeder Unit
- Food Storage Container
- Feeding Tray
- Power Adapter
- User Manual
3. Assembly Instructions
- Unpack all components and verify that you have everything listed.
- Attach the food storage container to the top of the main feeder unit by twisting it clockwise until securely locked.
- Place the feeding tray at the base of the feeder unit.
- Connect the power adapter to the feeder’s back, then plug it into an electrical outlet.
4. Setting Up the Feeder
- Turn on the feeder by pressing the power button.
- Set the current time:
- Press and hold the “Clock” button until the hour digits begin to flash.
- Use the “+” and “-” buttons to adjust the hour.
- Press the “Clock” button again to set the minutes in the same manner.
- Adjust the portion size using the portion size button. Refer to the portion size chart in the manual for assistance.
5. Programming Feeding Times
- Press the “Meal” button to choose the meal you wish to program (Meal 1, Meal 2, etc.).
- Set the feeding time:
- Press and hold the “Clock” button until the hour digits flash.
- Use the “+” and “-” buttons to set the feeding hour.
- Press “Clock” again to set the minutes similarly.
- Adjust the portion size for this meal using the portion size button.
- Repeat steps 1-3 to program additional meals if required.
6. Cleaning and Maintenance
- Unplug the feeder before cleaning.
- Remove the food storage container and feeding tray.
- Wash the container and tray with warm, soapy water. Rinse and dry thoroughly.
- Wipe the main feeder unit with a damp cloth. Avoid submerging it in water.
7. Troubleshooting
- Feeder Not Dispensing Food: Ensure the feeder is properly plugged in and that there is food in the container. Verify that feeding times are correctly programmed.
- Display Not Working: Confirm that the feeder is connected to a functional outlet. If the issue persists, contact customer support.
- Food Jam: Clean the dispenser and check for any food blockages in the dispensing mechanism.
